;
;
;  Server Settings .INI file for Renegade Free Dedicated Server.
;
;  This file controls the behavior of a Renegade Free Dedicated Server. The
;  first instance of the server is referred to as the Master Server and it can
;  control up to seven other local instances of the server. These are referred
;  to as Slave Servers.
;
;  Each slave server must have it's own login information and serial number.
;  Each slave server can have it's own game settings, seperate from the master.
;
;
;
; ============================================================================
; ============================================================================
;
;  This section of the file is generated automatically - do not edit
;
;  Available Westwood Servers:
;
;    Pacific Server
;    European Server
;    USA Server
;
;  End generated section.
;
; ============================================================================
; ============================================================================


;
; Renegade Master Server settings.
;
; This section contains the settings for the Master Renegade Server.

[Server]

; Config =
;
;  This specifies the location of the game settings file used by the master
;  server. You can change this to point to any Renegade server settings .ini
;  file or change the default .ini file to reflect the game settings you would
;  like for your server.

Config = svrcfg_cnc.ini


; GameType =
;
;  Set this to WOL for a Westwood Online dedicated server.
;  Set this to GameSpy for a GameSpy mode dedicated server.
;  Set this to LAN for a LAN mode dedicated server.
;

GameType = WOL


; Nickname =
;
;  This is the Westwood Online nickname you will use when logging into the
;  Westwood Online matchmaking system. You can use a nickname from a previous
;  Westwood Studios game or apply for a new one by copying the following line
;  and pasting it into your web browsers address window
;
;     http://register.westwood.com

Nickname = XxxFuzzy


;
; Password =
;
;  This is the password that matches the nickname used above.

Password = (Password Protection)


; Serial =
;
;  The serial number that you specified when installing the Renegade Dedicated
;  Server.

Serial = (Serial Protection)

; LoginServer =
;
;  This field can be used to specify the Westwood Online matchmaking server
;  to connect to. If left blank, the Renegade Server will connect to the
;  closest matchmaking server. To specify a server to connect to, use one of
;  the names listed above in the section 'Available Westwood Servers'.

LoginServer = USA Server


; Port =
;
;  This is the UDP port that the Renegade Dedicated Server will use to
;  communicate with game clients. This should normally be left at 0 and the
;  Server will decide for itself what port to use. This should work with most
;  firewalls and NAT connections but, if you need to manually set a port, you
;  can do it here.

Port = 4949


; GameSpyGamePort =
;
;  This is the UDP port that the Renegade Dedicated Server will use to
;  communicate with game clients, while running as a GameSpy Server.  When running
;  as a GameSpy server this port value will be used instead of the above Port value.
;  The default value is 4848.

GameSpyGamePort = 0


; GameSpyQueryPort =
;
;  This is the UDP port that the Renegade Dedicated Server will use to
;  communicate with the GameSpy Master Server and GameSpy clients. The default
;  value is 25300.  If this port is in use Renegade will find another port
;  to use instead(25301, 25302, ...).

GameSpyQueryPort = 0


; BandwidthUp =
;
;  If you know how much bandwidth you want to allocate for the Renegade
;  Server to use then you can specify it here. A minimum of 60k bits per second
;  is recommended for each client you plan to connect to. If you leave this
;  value as 0 (the default) then the available bandwidth will be automatically
;  detected(WOL only). Some guidelines follow.
;
;         Set to 1500000 for a 32 player game
;         Set to  750000 for a 16 player game
;         Set to  250000 for an 8 player game
;
;  Make sure you don't set the Bandwidth number to be higher than your
;  actual available bandwidth or gameplay performance will be poor.

BandwidthUp = 250000

; NetUpdateRate =
;
;  Set this to control the frequency of network updates sent to clients.  This
;  is the number of updates sent per second.  Higher values increase network
;  traffic, lower values decrease traffic.  Valid values must be in the 5 - 30
;  range.  As you increase NetUpdateRate the values set for BandwidthUp must
;  also scale accordingly.  The default is 10.

NetUpdateRate = 10


; AllowRemoteAdmin =
;
;  Set this to true to enable remote server administration via the RenRem
;  tool. You must also set a password for remote administration to be
;  allowed.
;  Slave servers inherit this setting from the master.

AllowRemoteAdmin = true


; RemoteAdminPassword =
;
;  This is the password required to connect to a server with the RenRem
;  admin too.
;  Slave servers inherit this setting from the master.

RemoteAdminPassword = (Password Protection)


; RemoteAdminIp =
;
;  This is the ip that the remote administration service will listen for
;  incoming request on.  The default is to listen on ALL ip addresses.  If
;  you have an internal ip address and only want to administer internally
;  set this to your internal ip address.
;

RemoteAdminIP = 127.0.0.1


; RemoteAdminPort =
;
;  The port to connect to for remote administration.
;  This can be set per slave. The default slave ports will be shown when
;  connecting to the master with the RenRem tool.

RemoteAdminPort = 4949

# BRenBot configuration file
#
# This is the main configuration file for BRenBot. It is recommended that
# you read the readme file before you start editing this. You should edit
# at least the ircAdminChannel and botName settings.


#------------------------------------------------------------------------------------
# IRC Settings
# General settings for the irc connection
#------------------------------------------------------------------------------------

# IRC server to connect to
IrcServer = 206.41.117.114
IrcPort = 6667

# Username for BRenBot to use in IRC
BotName = SnipersBot
BotFullName = BRenBot 1.52 (Win32)

# IRC admin channel
ircAdminChannel = #Snipers
ircAdminChannelKey = 

# IRC public channel, leave channel name blank to disable
ircPublicChannel = 
ircPublicChannelKey = 

# Maximum characters per second to send to the irc.
ircCharsPerSecond = 8000

# Adds [BR] to the front of all IRC messages. Intended for compatibility
# with mirc bots which parse BRenBot messages and expect this to be there.
prefixIRCMessages = 0

# Shows team (F3) chat in the public irc channel. Only has an effect if
# you use the public channel and teammessages module is enabled.
showTeamChatInPublicChan = 0



#------------------------------------------------------------------------------------
# IRC Auth Settings
# Various methods to get your bot to authorise itself on IRC
#------------------------------------------------------------------------------------

# Enable auth via "Q" or "Nickserv" below. Sample input is shown.
Qauth = 0
Qusername = RenBot01
Qpassword = mypassword

# NickServ authorisation. To use NickServ authorisation fill in the Nickservauth
# parameter as appropriate. Example: Nickservauth = identify botNickPass
Nickservauth = 
Nickservname = Nickserv

# OPER authorisation, if you dont know what this is don't worry about it.
# Fill in the password and user paramaters to enable oper auth.
operAuthUser = 
operAuthPass = 



#------------------------------------------------------------------------------------
# Windows or Linux
# BotMode MUST be "WIN32" for windows servers, or "LFDS" for Linux servers.
#------------------------------------------------------------------------------------

BotMode = WIN32



#------------------------------------------------------------------------------------
# Remote Admin Settings
#
# The next 3 lines should be the same info that is in your server.ini
# Note: Although it says "Linux" its the same for Win32 :-)
#------------------------------------------------------------------------------------

RenRemLinuxHost = 127.0.0.1
RenRemLinuxPort = 4949
RenRemLinuxPassword = (Password Protecton)



#------------------------------------------------------------------------------------
# FDS Installation
#
# Verify these paths are correct with your Renegade installation.
# Note: FDSLogFilePath must end with the trailing slash (as example below)!!
# Note: Linux users use forward slashes (/) in your paths.
#------------------------------------------------------------------------------------

FDSConfigFile = C:\Westwood\RenegadeFDS\Server\data\svrcfg_cnc.ini
FDSLogFilePath = C:\Westwood\RenegadeFDS\Server\



#------------------------------------------------------------------------------------
# Miscellaneous Settings
# Settings that dont fit under any of the other categories
#------------------------------------------------------------------------------------

# Every x seconds the bot will announce a random line from AutoAnnounceFile.
AutoAnnounceInterval = 600

# LadderLookup currently not working. Do not turn it on or it will hang the bot.
EnableLadderLookup = 1

# Set vehicle kick to 1 for Sniper servers
VehicleKick = 1

# Name of the BrenBot Executable, can have any file extension. Used by restart.exe
BRenBot_Executable = brenbot.exe

# Forces all players to have bhs.dll (NOT RECOMMENDED)
Force_bhs_dll = 0

# Enable paging players with CMSGP instead of PPAGE. This causes pages to be green, which
# is generally more readable ingame, but has been known to cause crashes on the LFDS.
Enable_CMSG_Paging = 1

# Donate is tied to gamelog, because bhs.dll can crash the FDS if a player tries to donate
# to someone who has not finished loading the map. Enabling this means people will be able
# to crash your server!

Seperate_Donate_From_Gamelog = 0



#------------------------------------------------------------------------------------
# Voting Settings
# Settings for BRenBot's voting system
#------------------------------------------------------------------------------------

# Set this to 0 to disable voting, 1 to enable
VotingEnabled = 1

# How long votes should last, in seconds.
VotingPeriod = 60

# Enable / Disable the different types of votes here. 1 to enable, 0 to disable.
Voting_Allow_Change_Nextmap = 1
Voting_Allow_Gameover = 1
Voting_Allow_Kick = 1




#------------------------------------------------------------------------------------
# BR Configuration Files
# Filenames for other config files, you should not need to change these.
#------------------------------------------------------------------------------------

AutoAnnounceFile = autoannounce.cfg
Messagesfile = messages.cfg
ModeratorsFile = moderators.cfg
PresetsFile = presets.cfg
KickLogFile = kicklog.log
BanLogfile = banlog.log
MiscLogFile = misclog.log



#------------------------------------------------------------------------------------
# Automatic Recommendations
#------------------------------------------------------------------------------------

# Minimum score needed to get the end of game highest score recommendation
Autorec_Minimum_Score = 750

# Minimum kills needed to get the end of game most kills recommendation
Autorec_Minimum_Kills = 10

# Minimum k/d ratio needed to get the end of game best KD recommendation
Autorec_Minimum_KD = 1.5



#------------------------------------------------------------------------------------
# Moderator Setting
#------------------------------------------------------------------------------------

# Force moderators to register their username on BRenBot, so they have to !auth
# to get their moderator powers. Set to 1 to enable, 0 to disable.
Moderators_Force_Auth = 1

# Enables or disables all moderator sybmols. Set to 1 to enable, 0 to disable.
Moderators_Show_Symbols = 1

# Symbols for moderators, if enabled above
Moderators_Temp_Mod_Symbol = +
Moderators_Half_Mod_Symbol = %
Moderators_Full_Mod_Symbol = @
Moderators_Admin_Symbol = &

# Enable or disable the join message for moderators and administrators
Moderators_Show_Join_Message = 1




#------------------------------------------------------------------------------------
# Gamelog Settings
# These settings only apply if the Gamelog module is enabled.
#------------------------------------------------------------------------------------

# These five settings control which messages are shown in IRC. Set to 0 to
# disable, 1 to show in admin channel only, 2 to show in both channels.

Gamelog_Show_Vehicle_Purchase = 1
Gamelog_Show_Crate_Messages = 1
Gamelog_Show_Kill_Messages = 1
Gamelog_Show_Vehicle_Kill_Messages = 1
Gamelog_Show_Building_Kill_Messages = 1

# Shows vehicle stolen messages ingame. Set to 1 to enable, 0 to disable.
Gamelog_Show_Vehicle_Stolen = 1

# How many light vehicle kills are needed to get a recommendation
Gamelog_Autorec_Light_Vehicle_Kills = 8

# How many heavy vehicle kills are needed to get a recommendation
Gamelog_Autorec_Heavy_Vehicle_Kills = 5

# How many building health points need to be repaired to get a recommendation
Gamelog_Autorec_Building_Repair = 2000

# How many vehicle health points need to be repaired to get a recommendation
Gamelog_Autorec_Vehicle_Repair = 4000




#------------------------------------------------------------------------------------
# Gamespy Settings
# Settings to control the Gamespy broadcaster. See the readme for more details.
#------------------------------------------------------------------------------------

# Enable the GSA broadcasting system
Generate_Gamespy_Queries = 0

# Query port for your server, which GSA uses to communicate with your server
GameSpyQueryPort = 23500

# Enable broadcasting to GSA, if disabled the server will not be listed on
# the server lists. Also requires the gamespy_players module to be enabled.
Broadcast_Server_To_Gamespy = 0

# Your servers external IP
GameSpy_IP = 123.123.123.123