Renegade Public Forums
C&C: Renegade --> Dying since 2003™, resurrected in 2024!
Home » Tiberian Technologies / Blackhand Studios » Tiberian Technologies Forum » BRenBot 1.54.1
BRenBot 1.54.1 [message #487171] Sat, 12 April 2014 10:40 Go to next message
danpaul88 is currently offline  danpaul88
Messages: 5795
Registered: June 2004
Location: England
Karma: 0
General (5 Stars)
A compiled copy of BRenBot 1.54.1 is attached to this post for use with servers running SSGM 4.0 and newer. On top of the changes already posted for 4.1 (see this topic) this version contains the following changes;



GameSpy update
As you're probably already aware if you follow this topic the GSA master servers will be shut down soon. I was asked to support broadcasting to multiple master servers in the interim whilst servers switch over, which is the main driver for this update.

Rather than implement a quick band-aid fix in the bot I've pulled GSA out of the core codebase and made it a plugin instead, retaining all of the same features you're used to and adding several new ones at the same time.

The new plugin supports broadcasting to as many master servers as you want, simply list each server in plugins/gamespy.xml and it will broadcast to each of them.

In addition I rewrote the handling for custom server info such that you can now define your own Key=Value pairs in the config XML rather than being limited to the pre-provided set of Website, IRC, Teamspeak and Ventrillo. Some examples are provided in the default config XML, although they are commented out until you choose to use them.

Note: For those updating an existing installation of BRenBot be sure to fill in the config settings in plugins/gamespy.xml. All GSA related settings in brenbot.cfg are now redundant and can be deleted after copying the relevant values into the plugin configuration.

Note: New plugins are not loaded automatically by BRenBot, use !plugins to see which plugins are loaded and !plugin_load or !plugin_unload to load and unload plugins respectively.




Bug Fixes

  • Vehicle purchase IRC message did not respect teams.cfg settings
  • Vote command always counted zero total votes in some cases





Code Improvements
A new fds module has been introduced to provide a central place for checking which functionality is supported on any given server or client based on version checking. Eventually this will be the go-to library for sending any commands to the FDS and will replace most direct usages of RenRemCMD elsewhere in the code.

This module is being written with proper function prototypes and is designed to support transmitting commands over the TCP SSGM channel in a future update.




Bug Reporting
Please report any bugs you might find or submit feature requests on the BRenBot Trello board by commenting on the cards under "BRenBot 1.54.1".




Acknowledgements
Thanks to Ethenal for contributing some bug fixes to the BRenBot SVN.

http://steamsignature.com/card/1/76561197975867233.png

[Updated on: Sun, 13 April 2014 06:37]

Report message to a moderator

Re: BRenBot 1.54.1 [message #487301 is a reply to message #487171] Mon, 21 April 2014 16:34 Go to previous messageGo to next message
OuTSMoKE is currently offline  OuTSMoKE
Messages: 52
Registered: April 2009
Location: Chicago, IL
Karma: 0
Recruit
!poll gameover works, but !poll nextmap isn't.

Here's copy/paste:

[6:27pm] <&KamServ> Host: [BR] Voting period over, tallying votes... GDI; 1 Yes, 0 NoNod; 0 Yes, 0 No
[6:27pm] <&KamServ> Host: [BR] More yes votes than no votes. VOTE PASSED.
[6:27pm] <&KamServ> Host: [BR] Error setting next map to Quick_Draw.

Edit:

Also, the same problem as last with output for team chat. No space after [Team]

[6:37pm] <&KamServ> [Team]Kirill: !rt

I can fix that with Unk's help though for mine.

=================================

EDIT: Just noticed output line on vote totals is doubled. Bolded the line I'm talking about.

[11:53am] <03&KamServ> 14Host: [BR] Voting period over, tallying votes... GDI; 1 Yes, 0 NoNod; 0 Yes, 0 No

http://i237.photobucket.com/albums/ff42/BTNHBoardOuTSMoKE/CNCSig2.jpg
Kambot NewMaps 4.1 Marathon Server Owner


[Updated on: Sat, 26 April 2014 14:39]

Report message to a moderator

Re: BRenBot 1.54.1 [message #487396 is a reply to message #487301] Sun, 27 April 2014 22:08 Go to previous messageGo to next message
Xpert is currently offline  Xpert
Messages: 1588
Registered: December 2005
Location: New York City
Karma: 0
General (1 Star)
OuTSMoKE wrote on Mon, 21 April 2014 19:34



Also, the same problem as last with output for team chat. No space after [Team]

[6:37pm] <&KamServ> [Team]Kirill: !rt




I thought Ethenal had that fixed through the SVN. Same for the crate messages not having a space, or maybe he just did it on Jelly.

http://i32.photobucket.com/albums/d42/XpertMaverick/xpertyankee.jpg

Creator of NetGuard, an IRC network regulator.
Developer of the CloudyServ 0.982-X project.
Developer of the CloudyServ Ren-X bot.

Part time streamer - https://twitch.tv/gg_wonder

Report message to a moderator

Re: BRenBot 1.54.1 [message #487434 is a reply to message #487396] Wed, 30 April 2014 10:35 Go to previous messageGo to next message
OuTSMoKE is currently offline  OuTSMoKE
Messages: 52
Registered: April 2009
Location: Chicago, IL
Karma: 0
Recruit
Xpert wrote on Sun, 27 April 2014 22:08

OuTSMoKE wrote on Mon, 21 April 2014 19:34



Also, the same problem as last with output for team chat. No space after [Team]

[6:37pm] <&KamServ> [Team]Kirill: !rt




I thought Ethenal had that fixed through the SVN. Same for the crate messages not having a space, or maybe he just did it on Jelly.


Just looked, yes crate messages are fucked up too.

[12:11pm] <&KamServ> [Crate]:scholte got the Overhaul crate ( Vehicle )

There's a : instead of a space. I know last bren had same issues, we manually fixed with pearl, unknown helped me. If we get around to it soon and no one has posted here again, I'll drop a link to a new .exe in this thread. Smile

http://i237.photobucket.com/albums/ff42/BTNHBoardOuTSMoKE/CNCSig2.jpg
Kambot NewMaps 4.1 Marathon Server Owner


Report message to a moderator

Re: BRenBot 1.54.1 [message #487480 is a reply to message #487171] Sat, 03 May 2014 16:34 Go to previous messageGo to next message
OuTSMoKE is currently offline  OuTSMoKE
Messages: 52
Registered: April 2009
Location: Chicago, IL
Karma: 0
Recruit
Got the outputs updated for anyone that wanted them fixed. New brenbot.exe (rar'd) attached to this post.

Changes: Fixed spacing issues for Team chat and crate messages.


Team Chat:

Old:
[11:36am] <&KamServ> [Team]Imperator: type !hp 100 or !ap 100

New:
[6:30pm] <&KamServ> [Team] OuTSMoKE: team chat test


Crate IRC Output:

Old:
[2:53pm] <&KamServ> [Crate]:Wanja got the Demolition Kit crate ( Infantry )

New:
[6:32pm] <&KamServ> [Crate] OuTSMoKE got the Second Wind crate ( Infantry )
  • Attachment: brenbot.rar
    (Size: 7.46MB, Downloaded 147 times)


http://i237.photobucket.com/albums/ff42/BTNHBoardOuTSMoKE/CNCSig2.jpg
Kambot NewMaps 4.1 Marathon Server Owner


Report message to a moderator

Re: BRenBot 1.54.1 [message #487586 is a reply to message #487171] Wed, 14 May 2014 06:02 Go to previous messageGo to next message
Jerad2142 is currently offline  Jerad2142
Messages: 3813
Registered: July 2006
Location: USA
Karma: 6
General (3 Stars)
So I downloaded this yesterday in hopes of getting my server to both show up on WOL and GSA, however I have yet to see it show up on GSA (or to be more specific RenList beings GSA doesn't show any games on my computer).

I tried it stock 1.54.1 and I also dug around and found some 1.53 instructions and tried adding 
Generate_Gamespy_Queries = 1
GameSpyQueryPort = 23500
Broadcast_Server_To_Gamespy = 1
GameSpy_IP = 123.123.123.123

to my config.xml (with GameSpy_IP being the IP of my server).

I also tried opening the port 4849 on my router just in case it was another port forwarding issue (I recall reading somewhere that the port for some part of the gamespy system should be one more than the port for RenFDS).

Any ideas?


Visit Jerad's deer sweat shop

Report message to a moderator

Re: BRenBot 1.54.1 [message #487587 is a reply to message #487171] Wed, 14 May 2014 06:15 Go to previous messageGo to next message
iRANian is currently offline  iRANian
Messages: 4308
Registered: April 2011
Karma: 0
General (4 Stars)
See op

GameSpy update
As you're probably already aware if you follow this topic the GSA master servers will be shut down soon. I was asked to support broadcasting to multiple master servers in the interim whilst servers switch over, which is the main driver for this update.

Rather than implement a quick band-aid fix in the bot I've pulled GSA out of the core codebase and made it a plugin instead, retaining all of the same features you're used to and adding several new ones at the same time.

The new plugin supports broadcasting to as many master servers as you want, simply list each server in plugins/gamespy.xml and it will broadcast to each of them.

In addition I rewrote the handling for custom server info such that you can now define your own Key=Value pairs in the config XML rather than being limited to the pre-provided set of Website, IRC, Teamspeak and Ventrillo. Some examples are provided in the default config XML, although they are commented out until you choose to use them.

Long time and well respected Renegade community member, programmer, modder and tester.

Scripts 4.0 private beta tester since May 2011.

My Renegade server plugins releases

Report message to a moderator

Re: BRenBot 1.54.1 [message #487588 is a reply to message #487171] Wed, 14 May 2014 06:30 Go to previous messageGo to next message
danpaul88 is currently offline  danpaul88
Messages: 5795
Registered: June 2004
Location: England
Karma: 0
General (5 Stars)
Also be sure to actually load the GSA plugin once you have configured it;

danpaul88 wrote on Sat, 12 April 2014 18:40


Note: New plugins are not loaded automatically by BRenBot, use !plugins to see which plugins are loaded and !plugin_load or !plugin_unload to load and unload plugins respectively.

http://steamsignature.com/card/1/76561197975867233.png

Report message to a moderator

Re: BRenBot 1.54.1 [message #487589 is a reply to message #487588] Wed, 14 May 2014 08:04 Go to previous messageGo to next message
Jerad2142 is currently offline  Jerad2142
Messages: 3813
Registered: July 2006
Location: USA
Karma: 6
General (3 Stars)
iRANian wrote on Wed, 14 May 2014 07:15

See op

GameSpy update
As you're probably already aware if you follow this topic the GSA master servers will be shut down soon. I was asked to support broadcasting to multiple master servers in the interim whilst servers switch over, which is the main driver for this update.

Rather than implement a quick band-aid fix in the bot I've pulled GSA out of the core codebase and made it a plugin instead, retaining all of the same features you're used to and adding several new ones at the same time.

The new plugin supports broadcasting to as many master servers as you want, simply list each server in plugins/gamespy.xml and it will broadcast to each of them.

In addition I rewrote the handling for custom server info such that you can now define your own Key=Value pairs in the config XML rather than being limited to the pre-provided set of Website, IRC, Teamspeak and Ventrillo. Some examples are provided in the default config XML, although they are commented out until you choose to use them.

I'm not quite sure how I managed to download it and completely over look the bold orange "Gamespy Update" text, it was late last night, that's going to be my excuse ;p

danpaul88 wrote on Wed, 14 May 2014 07:30

Also be sure to actually load the GSA plugin once you have configured it;

danpaul88 wrote on Sat, 12 April 2014 18:40


Note: New plugins are not loaded automatically by BRenBot, use !plugins to see which plugins are loaded and !plugin_load or !plugin_unload to load and unload plugins respectively.



I'll give this a shot when I get home, I'm sure its the reason though! I felt like it would have to do with a plugin not being loaded.


Visit Jerad's deer sweat shop

Report message to a moderator

Re: BRenBot 1.54.1 [message #487590 is a reply to message #487171] Wed, 14 May 2014 08:15 Go to previous messageGo to next message
danpaul88 is currently offline  danpaul88
Messages: 5795
Registered: June 2004
Location: England
Karma: 0
General (5 Stars)
I'm actually in the process of finalising a 1.54.2 build at the moment to resolve an issue reported by OuTSMoKE in relation to the display of team messages in the public IRC channel. It also includes a few other core improvements to improve performance and code readability in the renlog parsing code (which has remained essentially unchanged since I took over BRenBot, until now)

http://steamsignature.com/card/1/76561197975867233.png

Report message to a moderator

Re: BRenBot 1.54.1 [message #487591 is a reply to message #487171] Wed, 14 May 2014 08:42 Go to previous messageGo to next message
Ethenal is currently offline  Ethenal
Messages: 2532
Registered: January 2007
Location: US of A
Karma: 0
General (2 Stars)
Yeah the new BR plugin system requires you to do !plugin_load once the bot is running to load any plugins, but once they're successfully loaded they'll be loaded every time the bot starts in the future (that is, until you type !plugin_unload).

-TLS-DJ-EYE-K wrote on Mon, 18 March 2013 07:29

Instead of showing us that u aren't more inteligent than a Toast, maybe you should start becomming good in renegade Thumbs Up

Report message to a moderator

Re: BRenBot 1.54.1 [message #487592 is a reply to message #487171] Wed, 14 May 2014 08:53 Go to previous messageGo to next message
danpaul88 is currently offline  danpaul88
Messages: 5795
Registered: June 2004
Location: England
Karma: 0
General (5 Stars)
I keep meaning to add a config option to automatically load new plugins it hasn't seen before (since you probably added them to the folder because you wanted them) but haven't quite got around to it yet. Partly because I bundle some plugins with the bot and don't necessarily want to load them by default...

http://steamsignature.com/card/1/76561197975867233.png

Report message to a moderator

Re: BRenBot 1.54.1 [message #487593 is a reply to message #487171] Wed, 14 May 2014 13:28 Go to previous messageGo to next message
ExEric3 is currently offline  ExEric3
Messages: 746
Registered: February 2005
Location: Slovakia
Karma: 0
Colonel
And dan try look on that banlist.

Report message to a moderator

Re: BRenBot 1.54.1 [message #487594 is a reply to message #487171] Wed, 14 May 2014 14:20 Go to previous messageGo to next message
danpaul88 is currently offline  danpaul88
Messages: 5795
Registered: June 2004
Location: England
Karma: 0
General (5 Stars)
what ban list?

EDIT: Oh, banlist.tsv... not sure that'll make it into this one, next one perhaps.

http://steamsignature.com/card/1/76561197975867233.png

[Updated on: Wed, 14 May 2014 14:21]

Report message to a moderator

Re: BRenBot 1.54.1 [message #487595 is a reply to message #487594] Wed, 14 May 2014 14:40 Go to previous messageGo to next message
Jerad2142 is currently offline  Jerad2142
Messages: 3813
Registered: July 2006
Location: USA
Karma: 6
General (3 Stars)
Okay my next problem has to do with the location of the log files, original FDS dumped them right into the server folder, but my 4.1 FDS is putting them in Server/Renegade/FDS/ which leaves brenbot trying over and over to find them (I tried creating paths.ini and throwing the dir in for the logs but that didn't do the trick, probably because I don't know the syntax).

I also just tried changing the location for it in brenbot.cfg via the FDSLogFilePath, but then it just doesn't start at all (gives an error about not being able to find server.ini).


Visit Jerad's deer sweat shop

Report message to a moderator

Re: BRenBot 1.54.1 [message #487596 is a reply to message #487171] Wed, 14 May 2014 15:00 Go to previous messageGo to next message
danpaul88 is currently offline  danpaul88
Messages: 5795
Registered: June 2004
Location: England
Karma: 0
General (5 Stars)
BRenBot doesn't even read the logfiles under SSGM 4.x... and it uses the default paths.ini settings if you don't have a copy of it in your data folder, so no need to create that.

http://steamsignature.com/card/1/76561197975867233.png

Report message to a moderator

Re: BRenBot 1.54.1 [message #487597 is a reply to message #487596] Wed, 14 May 2014 15:05 Go to previous messageGo to next message
Jerad2142 is currently offline  Jerad2142
Messages: 3813
Registered: July 2006
Location: USA
Karma: 6
General (3 Stars)
I'm not running ssgm, with 120+ ai running around the map is almost too much for it as is without SSGM trying to log object data.

Also, it seems my Gamespy plugin is using my RemoteAdminPort for my server's port instead of the Port or Gamespy port (they were 4848, and my RemoteAdminPort was 4849, however in the server listing for GSA it was showing my server with 4849, and I couldn't join until I changed the RemoteAdminPort to 4848, after which it correctly displayed in the listing).


Visit Jerad's deer sweat shop

[Updated on: Wed, 14 May 2014 15:07]

Report message to a moderator

Re: BRenBot 1.54.1 [message #487598 is a reply to message #487171] Wed, 14 May 2014 15:20 Go to previous messageGo to next message
danpaul88 is currently offline  danpaul88
Messages: 5795
Registered: June 2004
Location: England
Karma: 0
General (5 Stars)
The default UDP query port in BRenBot for GSA clients is 23500 in plugins/gamespy.xml and it reads the game port from server.ini

if ($_ =~ m/Port\s*=\s*(\d+)/)
    {
      $server_gameport = $1;
    }


Although it occurs to me that if RemoteAdminPort= is below Port= in your server config that regex would technically match that too... should probably fix that ^^


EDIT: Fixed for 1.54.2

http://steamsignature.com/card/1/76561197975867233.png

[Updated on: Wed, 14 May 2014 15:25]

Report message to a moderator

Re: BRenBot 1.54.1 [message #487599 is a reply to message #487598] Wed, 14 May 2014 15:28 Go to previous messageGo to next message
Jerad2142 is currently offline  Jerad2142
Messages: 3813
Registered: July 2006
Location: USA
Karma: 6
General (3 Stars)
danpaul88 wrote on Wed, 14 May 2014 16:20

The default UDP query port in BRenBot for GSA clients is 23500 in plugins/gamespy.xml and it reads the game port from server.ini

if ($_ =~ m/Port\s*=\s*(\d+)/)
    {
      $server_gameport = $1;
    }


Although it occurs to me that if RemoteAdminPort= is below Port= in your server config that regex would technically match that too... should probably fix that ^^


EDIT: Fixed for 1.54.2


I'll just throw remoteAdminPort above port for now and see if that does the trick.


As for the stock Ren logging path, any way I can make it work or do I have to bite the bullet and put the extra bloat (bloat being unneeded, not disliked) of SSGM on my server?


Visit Jerad's deer sweat shop

Report message to a moderator

Re: BRenBot 1.54.1 [message #487600 is a reply to message #487171] Wed, 14 May 2014 16:34 Go to previous messageGo to next message
danpaul88 is currently offline  danpaul88
Messages: 5795
Registered: June 2004
Location: England
Karma: 0
General (5 Stars)
Post the console output into here showing where it is looking for the renlog files... it's a long time since I've had a server that isn't running SSGM so I don't test that code very often.

http://steamsignature.com/card/1/76561197975867233.png

Report message to a moderator

Re: BRenBot 1.54.1 [message #487601 is a reply to message #487171] Wed, 14 May 2014 17:14 Go to previous messageGo to next message
Jerad2142 is currently offline  Jerad2142
Messages: 3813
Registered: July 2006
Location: USA
Karma: 6
General (3 Stars)
index.php?t=getfile&id=14944&private=0
  • Attachment: sdf.png
    (Size: 841.47KB, Downloaded 657 times)



Visit Jerad's deer sweat shop

Report message to a moderator

Re: BRenBot 1.54.1 [message #487602 is a reply to message #487171] Thu, 15 May 2014 02:22 Go to previous messageGo to next message
danpaul88 is currently offline  danpaul88
Messages: 5795
Registered: June 2004
Location: England
Karma: 0
General (5 Stars)
Ah, that explains it... without SSGM settings being present it's not applying any paths.ini logic (you'd see a message indicating it had if it was), obviously the code that checks for paths.ini is looking for SSGM version >= 4.0 and not considering the possibility of having TT >= 4.0 without SSGM itself. I'll update that tonight when I get home.

http://steamsignature.com/card/1/76561197975867233.png

Report message to a moderator

Re: BRenBot 1.54.1 [message #487604 is a reply to message #487602] Thu, 15 May 2014 18:31 Go to previous messageGo to next message
Jerad2142 is currently offline  Jerad2142
Messages: 3813
Registered: July 2006
Location: USA
Karma: 6
General (3 Stars)
Cool cool, guess I don't need to rush you too much, for the most part it seemed to run okay last night with SSGM on the server, but good to get all these bugs worked out all the same Very Happy


Visit Jerad's deer sweat shop

Report message to a moderator

Re: BRenBot 1.54.1 [message #487658 is a reply to message #487604] Tue, 20 May 2014 08:46 Go to previous messageGo to next message
Jerad2142 is currently offline  Jerad2142
Messages: 3813
Registered: July 2006
Location: USA
Karma: 6
General (3 Stars)
I think a cool feature would be a option that logs player chat to a new file. This would be nice because now the renlog files are flooded with:
*Players in-game*
Westwood online mode active since *day* - *time*
Gameplay in progress
    Map : *map name*
   Time : *time*
    Fps : *fps*
    GDI : #/# players       # points
    NOD : #/# players       # points

which makes it hard to read through the chat logs or find chat, or just to see if any players joined while the server owner isn't around.


Visit Jerad's deer sweat shop

Report message to a moderator

Re: BRenBot 1.54.1 [message #487663 is a reply to message #487171] Tue, 20 May 2014 15:12 Go to previous message
Wyld1USA is currently offline  Wyld1USA
Messages: 396
Registered: January 2004
Karma: 0
Commander
Thank you for all your work on this Dan. Much appreciated.

http://i66.tinypic.com/24ca5ur.jpg
"Who cares what people think, it is what you know." "Feel the Love."
~Original Demo Player~

Report message to a moderator

Previous Topic: nulling damage script?
Next Topic: The future of scripts post-4.1
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Thu Dec 26 16:42:18 MST 2024

Total time taken to generate the page: 0.01273 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 420.69.
Copyright ©2001-2023 FUDforum Bulletin Board Software