Renegade Public Forums
C&C: Renegade --> Dying since 2003™, resurrected in 2024!
Home » Renegade Discussions » Mod Forum » Switching characters using gmax/renx...
Switching characters using gmax/renx... [message #408019] Thu, 22 October 2009 13:51 Go to next message
ChewML is currently offline  ChewML
Messages: 918
Registered: June 2008
Karma: 0
Colonel
I got the hex editing figured out, but some characters I can't swiitch like I want due to the number of characters in the files.

Before I delete these programs for the 11th time...

I was wondering if someone might be able to explain how to take character w3d files from Ren and make them work for another.

If someone wants to do one and make SS to show, I would like to see the first havoc replaced with general locke.

I only ask because I figure it would be simple enough since the models, textures, boning, or whatever else is already done.

Here are the files to save time if someone decides to make a nice tutorial or whatever.

hmm... now that I think of it you would prolly only need the locke w3d, but I'll leave the havoc one there just in case or for reference.
Re: Switching characters using gmax/renx... [message #408036 is a reply to message #408019] Thu, 22 October 2009 18:41 Go to previous messageGo to next message
ChewML is currently offline  ChewML
Messages: 918
Registered: June 2008
Karma: 0
Colonel
Ok so I am trying to figure this out...

I downloaded this w3d importer crap, and it seems like it is working... but when I select the files to open they are not showing up in RenX?

Here is the link where I got the importer for reference.

http://www.the3rdage.net/item-48

I followed everything it told me to do, I just don't understand why it is not appearing to open the files?

Edit: Maybe this will help explain... It ask me to select w3d to import, I select c_ag_gdi_locke... then it ask for skeleton w3d to import... any suggestions?

[Updated on: Thu, 22 October 2009 18:58]

Report message to a moderator

Re: Switching characters using gmax/renx... [message #408072 is a reply to message #408019] Fri, 23 October 2009 05:16 Go to previous messageGo to next message
ErroR is currently offline  ErroR
Messages: 2984
Registered: March 2008
Location: Moldova
Karma: 0
General (2 Stars)
it should import, then you have to zoom in
Re: Switching characters using gmax/renx... [message #408117 is a reply to message #408019] Fri, 23 October 2009 12:33 Go to previous messageGo to next message
ChewML is currently offline  ChewML
Messages: 918
Registered: June 2008
Karma: 0
Colonel
I imported the w_nuke w3d to test... It works.

But like I said, when I try the c_ag_gdi_locke w3d the first box says "import w3d" I select the c_ag_gdi_locke, but then it ask me to select a skelecton w3d? I have tried selecting every other file including selecting the c_ag_gdi_locke twice, but nothing shows up (tried zooming in), and I don't get any error messages either.

What is the skelecton w3d?
Re: Switching characters using gmax/renx... [message #408122 is a reply to message #408019] Fri, 23 October 2009 13:16 Go to previous messageGo to next message
ChewML is currently offline  ChewML
Messages: 918
Registered: June 2008
Karma: 0
Colonel
Nevermind about the skeleton file I found it, s_a_human.w3d...

Now when I try to open c_ag_gdi_locke it ask for skeleton, so I select s_a_human... then the skeleton shows up.

How do I get the the rest of what I need together and ready to export/save as the havoc?

I hate to keep asking what some may consider dumb questions, but I have been using google and searching renegadehelp.net, but I am not finding answers. Blush
Re: Switching characters using gmax/renx... [message #408125 is a reply to message #408122] Fri, 23 October 2009 13:29 Go to previous messageGo to next message
ErroR is currently offline  ErroR
Messages: 2984
Registered: March 2008
Location: Moldova
Karma: 0
General (2 Stars)
Chew wrote on Fri, 23 October 2009 23:16

Nevermind about the skeleton file I found it, s_a_human.w3d...

Now when I try to open c_ag_gdi_locke it ask for skeleton, so I select s_a_human... then the skeleton shows up.

How do I get the the rest of what I need together and ready to export/save as the havoc?

I hate to keep asking what some may consider dumb questions, but I have been using google and searching renegadehelp.net, but I am not finding answers. Blush

need to rebone it, quite easy tho, don't take it as a hard tut
http://renegadehelp.net/index.php?act=tutorial&id=6108
Re: Switching characters using gmax/renx... [message #408133 is a reply to message #408125] Fri, 23 October 2009 15:25 Go to previous messageGo to next message
ChewML is currently offline  ChewML
Messages: 918
Registered: June 2008
Karma: 0
Colonel
Yea, I looked at that tutorial, that is how I figured out the skeleton part... but how do I get the actuall model (and texture) to load. All that show up is the skeleton.
Re: Switching characters using gmax/renx... [message #408142 is a reply to message #408019] Fri, 23 October 2009 18:59 Go to previous messageGo to next message
ChewML is currently offline  ChewML
Messages: 918
Registered: June 2008
Karma: 0
Colonel
This is where I am now...

I think I am understanding the tutorial for the most part... but where does the texture come in at? In the tutorial the model already has a texture on it. I am not finding how to get it in there.

SS for reference




Scratch all that... In that tutorial they already have the model with a texture on it. How do I get that before the skeleton crap?

[Updated on: Fri, 23 October 2009 21:42]

Report message to a moderator

Re: Switching characters using gmax/renx... [message #408164 is a reply to message #408019] Sat, 24 October 2009 03:12 Go to previous messageGo to next message
ErroR is currently offline  ErroR
Messages: 2984
Registered: March 2008
Location: Moldova
Karma: 0
General (2 Stars)
Simply select what you don't need, right click then hide selection. Now skin the character (press M) after that right click again and unhide all.
Re: Switching characters using gmax/renx... [message #408165 is a reply to message #408019] Sat, 24 October 2009 04:03 Go to previous messageGo to next message
E! is currently offline  E!
Messages: 70
Registered: February 2004
Karma: 0
Recruit
you got a major think fault mate.
c_ag_gdi_locke.w3d means it is the Aggregate which was not created in gmax/renx that's why you receive nothing when trying to import into. this file is just the result of linking each w3d files made with renx together to the complete character i.e. you got the head model and the body model and the aggregate will link them together so it is a complete character. you have to open c_ag_gdi_locke in w3d viewer which comes with the renegade public tools then you'll see the aggregate and all hierarchical models that depend to it and their textures.


<<SCUD-Storm Origin Creator>>

[Updated on: Sat, 24 October 2009 04:05]

Report message to a moderator

Re: Switching characters using gmax/renx... [message #408240 is a reply to message #408019] Sat, 24 October 2009 20:34 Go to previous messageGo to next message
ChewML is currently offline  ChewML
Messages: 918
Registered: June 2008
Karma: 0
Colonel
I think this problem may be coming from the merge part somehow...

I can't get it to bind with the wrap or however that is put. It only moves the crap that get brought in with the male file that comes with renegade tools...

I have doubles of all the "C" and "K" crap, SS for reference.



When I merge with the male file I get options not covered in the tutorial (that's why I assume the problem comes from there).

SS of the option boxes not covered in tutorial for reference.



Anyone have any ideas of what is wrong and how to fix this?
  • Attachment: ffs.jpg
    (Size: 179.94KB, Downloaded 578 times)
  • Attachment: ffs2.jpg
    (Size: 96.23KB, Downloaded 591 times)
Re: Switching characters using gmax/renx... [message #408283 is a reply to message #408019] Sun, 25 October 2009 09:29 Go to previous messageGo to next message
ErroR is currently offline  ErroR
Messages: 2984
Registered: March 2008
Location: Moldova
Karma: 0
General (2 Stars)
oh crap, E! Is right. I forgot :s import Locke_l0 and export as c_ag after boning
Re: Switching characters using gmax/renx... [message #408287 is a reply to message #408283] Sun, 25 October 2009 10:58 Go to previous messageGo to next message
ChewML is currently offline  ChewML
Messages: 918
Registered: June 2008
Karma: 0
Colonel
ErroR wrote on Sun, 25 October 2009 17:29

oh crap, E! Is right. I forgot :s import Locke_l0 and export as c_ag after boning


Yea, I started using the locke_10... but when it is all lined up I can't it to bind right? See the post 2 above for the SS.
Re: Switching characters using gmax/renx... [message #408288 is a reply to message #408019] Sun, 25 October 2009 11:00 Go to previous messageGo to next message
ErroR is currently offline  ErroR
Messages: 2984
Registered: March 2008
Location: Moldova
Karma: 0
General (2 Stars)
you have to import it using the existing skeleton, then delete EVERYTHING except the body and the head (it's separate on some models) then merge with Male.gmax
Re: Switching characters using gmax/renx... [message #408291 is a reply to message #408288] Sun, 25 October 2009 11:04 Go to previous messageGo to next message
ChewML is currently offline  ChewML
Messages: 918
Registered: June 2008
Karma: 0
Colonel
ErroR wrote on Sun, 25 October 2009 19:00

you have to import it using the existing skeleton, then delete EVERYTHING except the body and the head (it's separate on some models) then merge with Male.gmax


I think I may have tried this already, but when I merged it seemed like it all came back giving me doubles again? I'll try again here in a few mins to make sure.

Edit: tried it a couple more times... still coming up with doubles when merged.

[Updated on: Sun, 25 October 2009 11:33]

Report message to a moderator

Re: Switching characters using gmax/renx... [message #408368 is a reply to message #408291] Mon, 26 October 2009 07:13 Go to previous messageGo to next message
Jerad2142 is currently offline  Jerad2142
Messages: 3809
Registered: July 2006
Location: USA
Karma: 6
General (3 Stars)
When you import a character into Gmax, it takes that character and ALL of its lod models, and ports them in as well, hints why you get multiple of each bone type.

Re: Switching characters using gmax/renx... [message #408370 is a reply to message #408368] Mon, 26 October 2009 07:51 Go to previous messageGo to next message
ChewML is currently offline  ChewML
Messages: 918
Registered: June 2008
Karma: 0
Colonel
Jerad Gray wrote on Mon, 26 October 2009 08:13

When you import a character into Gmax, it takes that character and ALL of its lod models, and ports them in as well, hints why you get multiple of each bone type.


I only get one set when I import the w3d, then I delete them... but then when I merge them with the male.gmax I get doubles again?

How should I fix this to where I only get one set that will bind to the cross bone and move with the animation?
Re: Switching characters using gmax/renx... [message #408731 is a reply to message #408370] Thu, 29 October 2009 03:33 Go to previous messageGo to next message
ErroR is currently offline  ErroR
Messages: 2984
Registered: March 2008
Location: Moldova
Karma: 0
General (2 Stars)
Chew wrote on Mon, 26 October 2009 16:51

Jerad Gray wrote on Mon, 26 October 2009 08:13

When you import a character into Gmax, it takes that character and ALL of its lod models, and ports them in as well, hints why you get multiple of each bone type.


I only get one set when I import the w3d, then I delete them... but then when I merge them with the male.gmax I get doubles again?

How should I fix this to where I only get one set that will bind to the cross bone and move with the animation?

are you sure you didn't accidentaly save overwritten male.gmax? because i do it all the time and it worked Dont Get It
Re: Switching characters using gmax/renx... [message #408768 is a reply to message #408731] Thu, 29 October 2009 09:50 Go to previous messageGo to next message
ChewML is currently offline  ChewML
Messages: 918
Registered: June 2008
Karma: 0
Colonel
ErroR wrote on Thu, 29 October 2009 10:33

Chew wrote on Mon, 26 October 2009 16:51

Jerad Gray wrote on Mon, 26 October 2009 08:13

When you import a character into Gmax, it takes that character and ALL of its lod models, and ports them in as well, hints why you get multiple of each bone type.


I only get one set when I import the w3d, then I delete them... but then when I merge them with the male.gmax I get doubles again?

How should I fix this to where I only get one set that will bind to the cross bone and move with the animation?

are you sure you didn't accidentaly save overwritten male.gmax? because i do it all the time and it worked Dont Get It


Could you post the male.gmax file for me to download to make sure it is the right one? I don't really wanna go download the whole Renegade tools just for one file...

Edit: I open the male.gmax by itself and sure enough there are doubles....

  • Attachment: malegmax.jpg
    (Size: 164.92KB, Downloaded 474 times)

[Updated on: Thu, 29 October 2009 15:21]

Report message to a moderator

Re: Switching characters using gmax/renx... [message #408817 is a reply to message #408768] Thu, 29 October 2009 22:37 Go to previous messageGo to next message
Gen_Blacky is currently offline  Gen_Blacky
Messages: 3250
Registered: September 2006
Karma: 1
General (3 Stars)
the doubles is the hlod


http://s18.postimage.org/jc6qbn4k9/bricks3.png
Re: Switching characters using gmax/renx... [message #409116 is a reply to message #408817] Mon, 02 November 2009 11:32 Go to previous messageGo to next message
ErroR is currently offline  ErroR
Messages: 2984
Registered: March 2008
Location: Moldova
Karma: 0
General (2 Stars)
Gen_Blacky wrote on Fri, 30 October 2009 07:37

the doubles is the hlod


I never seemed to get that :s and sorry chew, I don't have Internet Sad
Re: Switching characters using gmax/renx... [message #409118 is a reply to message #409116] Mon, 02 November 2009 13:09 Go to previous message
ChewML is currently offline  ChewML
Messages: 918
Registered: June 2008
Karma: 0
Colonel
ErroR wrote on Mon, 02 November 2009 12:32

Gen_Blacky wrote on Fri, 30 October 2009 07:37

the doubles is the hlod


I never seemed to get that :s and sorry chew, I don't have Internet Sad


In the tutorial SS it didn't show doubles with the merge part?

Anyways due to my laptop having a short in the charger plug... I am not able to work on it. I am currently using my GF's laptop and she don't want me cluttering it with programs and files like mine was...
Previous Topic: City map contest!
Next Topic: CnC Reborn : Jumpjet Animation Test
Goto Forum:
  


Current Time: Sun Nov 03 12:46:55 MST 2024

Total time taken to generate the page: 0.01266 seconds