Home » Renegade Discussions » Mod Forum » My new project
| My new project [message #236831] |
Mon, 01 January 2007 23:04  |
 |
Cpo64
Messages: 1246
Registered: February 2003
Location: Powell River, B.C. Canada
Karma: 0
|
General (1 Star) |
|
|
finally got renegade installed again, my install disk was trashed, so I had to download an iso, which took forever, then had to download all that stuff. But finally I have almost got it together.
Anyways the map I'm going to try and complete is loosely based on the C&C 3 concept of "blue" zones. Basically the map takes place on the edge of a GDI city where NOD has broken threw the city wall and are now running around killing everyone, GDI has evacuated the area and are attempting to push NOD out of the city. Outside the city is a tiberum infested waste land, inside is a pristine city clean and healthy.
Attached is a screen of what I have done so far. Basic terrain layout, with wall and building place holders.
Not really anything special, but keeps me entertained.
-
Attachment: bluecity.jpg
(Size: 29.71KB, Downloaded 554 times)
-->
|
|
|
|
|
|
|
|
| Re: My new project [message #236842 is a reply to message #236841] |
Tue, 02 January 2007 01:43  |
nopol10
Messages: 1043
Registered: February 2005
Location: Singapore
Karma: 0
|
General (1 Star) |
|
|
| Alex wrote on Tue, 02 January 2007 16:34 |
| EXdeath wrote on Tue, 02 January 2007 01:25 |
Looks nice so far, can't wait to see more progress.
|
I second that! Few more textures and it will look sweet!
|
What about the Nod area?
nopol10=Nopol=nopol(GSA)
|
|
|
|
| Re: My new project [message #236890 is a reply to message #236831] |
Tue, 02 January 2007 09:29 |
|
Cpo64
Messages: 1246
Registered: February 2003
Location: Powell River, B.C. Canada
Karma: 0
|
General (1 Star) |
|
|
I think I'm going for an "Assault" type map, but that may change, there are two pathways that could lead to a base just behind the camera, however right now they just lead to a dead end.
-->
|
|
|
|
|
|
|
|
|
|
| Re: My new project [message #236942 is a reply to message #236940] |
Tue, 02 January 2007 19:19 |
|
Cpo64
Messages: 1246
Registered: February 2003
Location: Powell River, B.C. Canada
Karma: 0
|
General (1 Star) |
|
|
*bangs head on wall* read the post, particularly the sentence right above the picture...
-->
|
|
|
|
| Re: My new project [message #236972 is a reply to message #236831] |
Wed, 03 January 2007 00:32 |
Blazea58
Messages: 408
Registered: May 2003
Karma: 0
|
Commander |
|
|
Good to see your back and inspired to work on the ren mapping again. However the community right now seems like they all want the "next best thing" and the map itself doesn't seem to bring in any new things to the game. The map concept itself seems to be decent, but the overall design (yes i know its mostly placeholders) is lacking. Terrain is one of the largest aspects i look at, and all i see right now is a bit of mesh smoothing and pulling segs around.
Terrain should look alot more real, and if that were what i was using i would have started by just extruding a small 1x1 plane rather then dropping a big plane with segs already. Either way its a decent start and the concepts are what stick in your head the longest so i give you credit for still posting anyways what you have.
For your tiberium i would suggest you just make some low polygon crystals as the old flat texture method IMO is getting old, and renegade can handle alot of polygons. With those you could have environment reflect so you would only need some simplistic green textures to start with.
Otherwise if you have photoshop get "Filter Forge" Which has a bunch of filters you can create stuff closely similar and combine with eachother to get something just perfect. Here is a quick example.
This ones done with reflect of course, but you could try different things and id bet you can get something by far better then the old ren tiberium.
[Updated on: Wed, 03 January 2007 00:51] Report message to a moderator |
|
|
|
| Re: My new project [message #236974 is a reply to message #236831] |
Wed, 03 January 2007 01:00 |
 |
Veyrdite
Messages: 1471
Registered: August 2006
Location: Australia, Sydney
Karma: 0
|
General (1 Star) |
|
|
finally, someone whom decides to make a city map instead of some mountain pass. you need a medal
but building boxes???  ok, a list is kinda rude seeing it's your map, so call it possibilities
1.roofs/some sloped and overhanged
2.indents in some for doors (and door textures)
3.chimneys with emmiters
4.more shape/some buildings are a few floors, then simply have a smaller building base ontop which goes up etc
5.longer and curved buidings, maybe some joined with alleyways
6.stairs or ladders to the top of some
7.bridges from some roofs to others
8.insides (takes ages, so only do a few models and then merge them)
9.if you are really good, animate collapsing roofs, walls and stuff
either way you still need a medal for 3d bravery.
WOL: Veyrdite Previously: Dthdealer ( a long time ago )
[Updated on: Wed, 03 January 2007 01:01] Report message to a moderator |
|
|
|
| Re: My new project [message #236984 is a reply to message #236972] |
Wed, 03 January 2007 02:13 |
|
Cpo64
Messages: 1246
Registered: February 2003
Location: Powell River, B.C. Canada
Karma: 0
|
General (1 Star) |
|
|
| Blazea58 wrote on Wed, 03 January 2007 02:32 |
Terrain should look alot more real, and if that were what i was using i would have started by just extruding a small 1x1 plane rather then dropping a big plane with segs already.
|
Not really sure what you mean, could you provide an example, or explain it differently?
| Blazea58 wrote |
For your tiberium i would suggest you just make some low polygon crystals as the old flat texture method IMO is getting old, and renegade can handle alot of polygons. With those you could have environment reflect so you would only need some simplistic green textures to start with.
|
Intresting idea, is there a way to create a crystal garden effect without huge amounts of copying and pasting?
| Blazea58 wrote |
Otherwise if you have photoshop get "Filter Forge" Which has a bunch of filters you can create stuff closely similar and combine with eachother to get something just perfect. Here is a quick example.
(images removed)
This ones done with reflect of course, but you could try different things and id bet you can get something by far better then the old ren tiberium.
|
I'm assuming I could find "Filter Forge" on google? I'm not very good with photoshop, however your ideas are inspiring, are there any tutorials that would replicate closely to what I would be looking for? I like the third one you had, looks like cracked dried earth, sept crystalline, would there be a way to add a bumpmap to it to give it a 3d appearance?
To dthdealer: Thank you for your encouragement, however I already have plenty of plans for the buildings, as stated, the current boxes are place holders, I was using them to test that I could block off the draw distance limit, and to get a rough idea of placement.
Recreating the formations in this image would be awesome but that may be beyond me.
-->
[Updated on: Wed, 03 January 2007 02:32] Report message to a moderator |
|
|
|
| Re: My new project [message #236986 is a reply to message #236831] |
Wed, 03 January 2007 03:06 |
Blazea58
Messages: 408
Registered: May 2003
Karma: 0
|
Commander |
|
|
Well i personally take a 1x1 seg and kinda extrude at random pretty much, and try to extrude one side and rotate as i go until i reach other and weld, then ill take those edges and extrude up and make mountains, etc. It is alot harder to explain but if you look at westwood maps you get a clear idea of how they are not done just with mesh smoothing, but rather drawing it in as you go. Maybe you can pm me for further details.
Yea filter forge was a free thing for photoshop, useful for anyone that needs textures in a game, because some are far to advanced to create by hand especially being seamless.
http://www.filterforge.com/ It is also very easy to use, just hit filters then you will see it in photoshop after you download it.
And as for the tiberium crystals , as seen in most the cnc 3 pics its just boxes with taper on the top, and mostly just clones of them with different sizes and shapes, then probably atleast 10 variations total.
Quick one
As for the picture you posted , that type of crystal would be make the polygons a tad to high with your gardens of them, pic above is 336, but if you did it like the reference it would be alot higher trying to create the roundness and edges it has all over it.
[Updated on: Wed, 03 January 2007 03:12] Report message to a moderator |
|
|
|
| Re: My new project [message #236987 is a reply to message #236831] |
Wed, 03 January 2007 03:20 |
|
Cpo64
Messages: 1246
Registered: February 2003
Location: Powell River, B.C. Canada
Karma: 0
|
General (1 Star) |
|
|
I just tried to make a reflective surface and failed miserably. Are there any tutorials on this? Are textures required?
-->
|
|
|
|
|
|
| Re: My new project [message #237004 is a reply to message #236974] |
Wed, 03 January 2007 08:39 |
 |
Jerad2142
Messages: 3809
Registered: July 2006
Location: USA
Karma: 6
|
General (3 Stars) |
|
|
| dthdealer wrote on Wed, 03 January 2007 01:00 |
finally, someone whom decides to make a city map instead of some mountain pass. you need a medal
but building boxes??? ok, a list is kinda rude seeing it's your map, so call it possibilities
1.roofs/some sloped and overhanged
2.indents in some for doors (and door textures)
3.chimneys with emmiters
4.more shape/some buildings are a few floors, then simply have a smaller building base ontop which goes up etc
5.longer and curved buidings, maybe some joined with alleyways
6.stairs or ladders to the top of some
7.bridges from some roofs to others
8.insides (takes ages, so only do a few models and then merge them)
9.if you are really good, animate collapsing roofs, walls and stuff
either way you still need a medal for 3d bravery.
|
He did say that the buildings were only place holders.
Secondly, be careful with the reflection stuff, I have found that scripts 3.1 can really mess with stuff (makes the object to bright, or if there are to objects with the second pass of add and they are really close to each other they can be seen thought each other.
Oh and for stage 1 mapping environment is used for box like objects WS environment is for more rounded objects.
Visit Jerad's deer sweat shop
[Updated on: Wed, 03 January 2007 08:42] Report message to a moderator |
|
|
|
| Re: My new project [message #237010 is a reply to message #236831] |
Wed, 03 January 2007 09:26 |
Blazea58
Messages: 408
Registered: May 2003
Karma: 0
|
Commander |
|
|
Yea the way Mad Ivan said is how i did mine, though i added a second pass to also add the bumpmap for the last pic i had shown.
|
|
|
|
| Re: My new project [message #237028 is a reply to message #236831] |
Wed, 03 January 2007 13:11 |
 |
rm5248
Messages: 1156
Registered: November 2003
Location: USA
Karma: 0
|
General (1 Star) |
|
|
| Quote: |
and renegade can handle alot of polygons.
|
Renegade is very good at handling a lot of polygons, assuming that they are untextured. The performance slows down dramatically when you put textures on.
w00t?
|
|
|
|
|
|
| Re: My new project [message #237178 is a reply to message #236831] |
Thu, 04 January 2007 03:09 |
Blazea58
Messages: 408
Registered: May 2003
Karma: 0
|
Commander |
|
|
I would say it handles both very well as i have already put in 883 textures for roleplay 2, and no vis at all. I don't think there is many games even on its own where a single level uses this much resources, yet it still runs fairly well considering you have a decent computer.
I personally think its about what your computer has more so,as if we give it 5 more years, we will be laughing at the fact we used bump maps in games when it will be all created by hand instead o.O
[Updated on: Thu, 04 January 2007 03:11] Report message to a moderator |
|
|
|
|
|
| Re: My new project [message #238512 is a reply to message #236831] |
Wed, 10 January 2007 20:52 |
|
Cpo64
Messages: 1246
Registered: February 2003
Location: Powell River, B.C. Canada
Karma: 0
|
General (1 Star) |
|
|
Can anyone explain how reflections work? And how to set up the "best" looking ones? How does it use the reflection map? Is it just like a regular texture but only shows it on camera angles? Light angles? combination of both?
Or is it show different parts of the texture depending where your looking? I really can't understand how to use them without them looking like crap.
Anyways update on the map, competently redone the terrain, GDI base is now at the top of a terraced hill, with roads running east to west, north to south, buildings filling most the empty spots, NOD base is in a lower "park" area, trees, small pond and stream maybe, map is also smaller in size, but still rather large. Main focus will be urban combat.
-
Attachment: blue3.jpg
(Size: 21.65KB, Downloaded 155 times)
-->
|
|
|
|
Goto Forum:
Current Time: Sat Nov 02 12:54:29 MST 2024
Total time taken to generate the page: 0.01245 seconds
|
Search
Help
Members
Register
Login
Home
.
