Command and Conquer: Renegade Official Forums - RDF feed
type: channel
description: C&C: Renegade --> Dying since 2003™, resurrected in 2024!
items: Logos

Logos
type: item
description: OK, I have a few logos here for sale. I need to make some room and some of my logos have to go. The first one up is a Half Life 2 logo: Logo size is: 8 inches tall x 9 1/2 inches wide x 1/2 inch thick. Price is: $35.00 US + shipping.
creator: JeffLee67
date: 2004-11-24T23:02:51-00:00

Logos
type: item
description: You own, you do know that, right?
creator: cheesesoda
date: 2004-11-24T23:03:51-00:00

Logos
type: item
description: Next is a Generals supersize GLA logo. Dimensions are: 20 inches tall x 24 inches wide x 1 inch thick. Price is: $100.00 US + shipping.
creator: JeffLee67
date: 2004-11-24T23:08:33-00:00

Logos
type: item
description: This one is not completely finished being painted, but will be soon. It is a supersized China logo. Dimensions are: 20 inches tall x 21 inches wide x 1 inch thick. Price is: $100.00 US + shipping.
creator: JeffLee67
date: 2004-11-24T23:10:47-00:00

Logos
type: item
description: This one will also soon be finished. It is the USA supersize logo. Dimensions are: 30 inches tall x 28 inches wide x 2 inches thick. Price is: $100.00 US + shipping.
creator: JeffLee67
date: 2004-11-24T23:13:07-00:00

Logos
type: item
description: NeoX a Lil' pricey eh? But they look good. That's hard work. And if you noticed, anything made out of wood costs A LOT. It's not over priced, it's worth the value.
creator: icedog90
date: 2004-11-24T23:13:56-00:00

Logos
type: item
description: icedog90 NeoX a Lil' pricey eh? But they look good. That's hard work. And if you noticed, anything made out of wood costs A LOT. It's not over priced, it's worth the value. Not wood, it's a plastic or something close to that
creator: cheesesoda
date: 2004-11-24T23:15:29-00:00

Logos
type: item
description: NeoX Wood doesn't cost that much, at least here in canada. You don't get what I'm talking about. When someone makes something good out of it (for one thing, it's really hard work) then its value has increased greatly.
creator: icedog90
date: 2004-11-24T23:17:23-00:00

Logos
type: item
description: I also have other logos in various stages of completion. Some folks wanted them, but never paid for them so no logo for them. Their loss is your gain! Let me know what you're looking for and I may have it! This one is close to completion and needs paint. Dimensions are: 8 inches tall x 18 inches wide x 1/4 inch tall. Price is: $75.00 US + shipping.
creator: JeffLee67
date: 2004-11-24T23:17:46-00:00

Logos
type: item
description: NeoX Wood doesn't cost that much, at least here in canada. If that were the case, why doesn't a wooden piece of furniture only cost about what the wood would cost? Maybe it's because not everyone can make something out of that cheap wood. What you are really paying for is the craftsmanship of the item, not the cost of the wood. **** If you are interested any of these logos or have a different one in mind, let me know via PM, find me on IRC in the #n00bstories channel, or even AIM @ JeffLee67. ****
creator: JeffLee67
date: 2004-11-24T23:20:32-00:00

Logos
type: item
description: Ice, Neo doesn't understand the concept of Supply and Demand, nor the idea of how labor affects a price. Neo, labor costs money. Labor isn't free.
creator: cheesesoda
date: 2004-11-24T23:20:55-00:00

Logos
type: item
description: As I always say: Someday... I'll buy one.
creator: icedog90
date: 2004-11-24T23:21:07-00:00

Logos
type: item
description: How Much do you charge for custom made ones?
creator: WNxCABAL
date: 2004-11-24T23:24:37-00:00

Logos
type: item
description: Can I actually reserve the Half Life 2 logo?
creator: Vitaminous
date: 2004-11-24T23:24:50-00:00

Logos
type: item
description: NeoX Im not saying that we should only have to pla for how much the supplies cost but I think thats way to much money for a piece of wood the supplies prolly cost like 5$ Id sell them for like 50$ for the complex ones. You still don't get it.
creator: icedog90
date: 2004-11-24T23:25:14-00:00

Logos
type: item
description: icedog90 NeoX Im not saying that we should only have to pla for how much the supplies cost but I think thats way to much money for a piece of wood the supplies prolly cost like 5$ Id sell them for like 50$ for the complex ones. You still don't get it. He truly doesn't. That's the sad thing, too. It's an extremely concept to grasp, yet he falls short. Surprise, surprise.
creator: cheesesoda
date: 2004-11-24T23:26:34-00:00

Logos
type: item
description: Here's an analogy: If you have a car and it is having engine problems, you take it to a mechanic and he finds that it needs a new head gasket he doesn't charge you $10.00 for a new head gasket and send you on your way does he? No, he has to charge you for his time to take out the old one and put in a new one. Same basic principle. A piece of wood may only be a couple of dollars, but how many people can cut it, carve it, sand it, and paint it to look exactly like the two dimensional object it is on some website or game box?
creator: JeffLee67
date: 2004-11-24T23:26:51-00:00

Logos
type: item
description: NeoX Im not saying that we should only have to pla for how much the supplies cost but I think thats way to much money for a piece of wood the supplies prolly cost like 5$ Id sell them for like 50$ for the complex ones. And that is your opinion, and you're welcome to it. I suggest you give it a try and after spending countless hours cutting, carving, sanding, and painting it, you tell me how much you think your effort was worth to make the item for someone else. I am not a factory, this stuff doesn't roll off of some assembly line, I make it all by hand. Time is money.
creator: JeffLee67
date: 2004-11-24T23:29:45-00:00

Logos
type: item
description: Neo, you do realize that he IS selling the HL2 one for $35. You should try reading for once.
creator: cheesesoda
date: 2004-11-24T23:30:20-00:00

Logos
type: item
description: NeoX Fuck you Icedog90. I know how it works but I think the labour is way to much for some of the pieces. For example the Half-Life 2 logo is very simple it should be like $30-35. Then for ones like Halo it should be $75. Um, yeah, if you weren't so fucking naive you'd notice that the Halo logo IS $75 and the HL2 logo IS $35.
creator: icedog90
date: 2004-11-24T23:30:35-00:00

Logos
type: item
description: _TFWxANDY_ How Much do you charge for custom made ones? Send me a PM on what you're looking for, and what size.
creator: JeffLee67
date: 2004-11-24T23:31:23-00:00

Logos
type: item
description: I was walking around Times Square (New York pwns) with some friends a couple of days ago and I saw a framed picture. It was about 36 in. by 36 in. It was a really cool "map" of manhattan with parts of queens, brooklyn, and the bronx. On the side it said it took about 2,000 pencils, and four years to finish. If it was to be sold, do you think $200 or less (approximate price of materials) is a fair price for it? I don't.
creator: prox
date: 2004-11-24T23:32:07-00:00

Logos
type: item
description: Aprime Can I actually reserve the Half Life 2 logo? Reserve it for how long?
creator: JeffLee67
date: 2004-11-24T23:32:08-00:00

Logos
type: item
description: Still doesn't change the fact that you can't read worth shit.
creator: cheesesoda
date: 2004-11-24T23:33:10-00:00

Logos
type: item
description: NeoX I know he is but the ones that are large and not complexed for $100 seem like a rip. You should come to the conclusion that it's obvious more complex ones that required more work WILL cost more money.
creator: icedog90
date: 2004-11-24T23:33:47-00:00

Logos
type: item
description: Then how come you missed a few important keys of some posts?
creator: icedog90
date: 2004-11-24T23:34:33-00:00

Logos
type: item
description: NeoX I DO READ YOU FUCKING HOMO! Apparently not well. I mean, c'mon, RIGHT underneath the pictures it CLEARLY stated that they are being sold for EXACTLY what you "thought" they should be. prox, no, that thing should be more than $200.
creator: cheesesoda
date: 2004-11-24T23:35:22-00:00

Logos
type: item
description: That was exactly my point, and the post was directed to Neo
creator: prox
date: 2004-11-24T23:36:10-00:00

Logos
type: item
description: You can't even spell your own country's name right.
creator: icedog90
date: 2004-11-24T23:37:42-00:00

Logos
type: item
description: Since when has Canadian money been worth CONSIDERABLY less than the American Dollar? It's less, but your $30-35 isn't much less than USD $30-35, plus, how the fuck are we supposed to remember that you're Canadian? Do you really think that we really care to know where you're from?
creator: cheesesoda
date: 2004-11-24T23:38:07-00:00

Logos
type: item
description: NeoX Read my previous post, and yes I do understand that its hand made so yes it is worth alot more. Edit -------------- I know he is but the ones that are large and not complexed for $100 seem like a rip. And that's your opinion once again. No problem, you don't have to buy any of them. I'm not making anyone buy any of them. If you think they are overpriced then that's fine with me, I know they will sell. You can ask any of the people who have some of my logos, for instance, Blazer0X, Crimson, Jarhead57, TryLee, AuroraX0, MsgtPain, PodKilr, IBRambo, L3f7h4nd3d, Aircraftkiller, Slash0X, Founder of YASA, DaveGMM, DJLaptop, and whoever else I forgot.
creator: JeffLee67
date: 2004-11-24T23:38:53-00:00

Logos
type: item
description: This one is done and ready to be sold too. Dimensions are: 20 inches tall x 24 inches wide x 3 1/2 inches thick. Price is: $100.00 US + shipping (should be more because it took forever to carve the scorpion tail)
creator: JeffLee67
date: 2004-11-24T23:41:46-00:00

Logos
type: item
description: As you can see, it's very 3 dimensional:
creator: JeffLee67
date: 2004-11-24T23:44:16-00:00

Logos
type: item
description: JeffLee67 Aprime Can I actually reserve the Half Life 2 logo? Reserve it for how long? Until Christmas.
creator: Vitaminous
date: 2004-11-24T23:46:52-00:00

Logos
type: item
description: I need to have a logo, but I don't see the point in having a gaming one. Jeff, you're willing to carve one by request right?
creator: cheesesoda
date: 2004-11-24T23:47:16-00:00

Logos
type: item
description: NeoX, how much would you figure this is worth? It is 14 inches tall and about 6 inches x 5 inches at the base? P.S. I already sold it, just wondering what you think I should have asked for it.
creator: JeffLee67
date: 2004-11-24T23:47:21-00:00

Logos
type: item
description: Aprime JeffLee67 Aprime Can I actually reserve the Half Life 2 logo? Reserve it for how long? Until Christmas. I'll make an extra one and hold it for you. Just let me know when you want it delivered.
creator: JeffLee67
date: 2004-11-24T23:49:02-00:00

Logos
type: item
description: I'd say like $150-200 at least. Jeff, you any good with electricity? If you are, then why not make one with working doors. That shouldn't add too much more to the cost and labor, but you could easily double the cost.
creator: cheesesoda
date: 2004-11-24T23:49:45-00:00

Logos
type: item
description: j_ball430 I need to have a logo, but I don't see the point in having a gaming one. Jeff, you're willing to carve one by request right? Yes. Just PM me. Or get me on AIM @ JeffLee67
creator: JeffLee67
date: 2004-11-24T23:50:14-00:00

Logos
type: item
description: j_ball430 I'd say like $150-200 at least. Jeff, you any good with electricity? If you are, then why not make one with working doors. That shouldn't add too much more to the cost and labor, but you could easily double the cost. I could have put an LED that lit up the crystal and made the door open and put the sounds in it too, but I chose not to because it was a lot of work.
creator: JeffLee67
date: 2004-11-24T23:55:08-00:00

Logos
type: item
description: NeoX , shut up , you will never win, no matter what you do , you need to pay attention to detail and understand something from all sides before you go and try to defend it. Also you don't have to buy these, i don't see why you are so affected with this , all of his work is extrmely 1337 and deserves credit/money. Infact it probably took you a shorter amount of time to spam your way to your current post count than for him to finish one of those logos. Btw: damn i like that NOD logo one , nice background paint , and when i saw that oby i thought it was an ingame model , very nice.
creator: MilkyLep
date: 2004-11-24T23:58:53-00:00

Logos
type: item
description: JeffLee67 Aprime JeffLee67 Aprime Can I actually reserve the Half Life 2 logo? Reserve it for how long? Until Christmas. I'll make an extra one and hold it for you. Just let me know when you want it delivered. Lol, thanks, I wasn't expecting that.
creator: Vitaminous
date: 2004-11-25T00:05:44-00:00

Logos
type: item
description: Well, for those interested I own five(5) items made by Jeff and they were worth every dime I payed. PS: Too late to raise the OB price Jeff......sure looks good on my desk alongside the AGT...
creator: Jarhead
date: 2004-11-25T00:58:40-00:00

Logos
type: item
description: LOL, thanks Jarhead. Didn't know you still frequent these parts! See ya on the Pits!
creator: JeffLee67
date: 2004-11-25T01:02:34-00:00

Logos
type: item
description: Not a day goes by when I don't look over my desk onto the wall behind it and watch in awe as the 9" China logo does... well, whatever a logo does on my wall. I remember the day the box game, I literally grabbed it from the postman and openened it on the doorstep, turns out he was a Generals player as well and admired the logo greatly. As anyone in that long, long list of Jeff's will tell you, you simply cannot take in how goddamn great these logos are until you hold it in your hands. Worth every penney.
creator: DaveGMM
date: 2004-11-25T01:32:33-00:00

Logos
type: item
description: How much are smaller ones? Say, a five inch Nod logo? What about a five inch HL2?
creator: boma57
date: 2004-11-25T02:01:47-00:00

Logos
type: item
description: Would you be able to do the Maxis Logo?
creator: Doitle
date: 2004-11-25T02:04:13-00:00

Logos
type: item
description: Your work is just incredible Jeff--anyone who buys one of his pieces will surely be very satisfied. :thumbsup: I know I would be...
creator: YSLMuffins
date: 2004-11-25T02:07:00-00:00

Logos
type: item
description: that halo one would look nice when its finished.. the detail is already great
creator: Majiin Vegeta
date: 2004-11-25T02:13:36-00:00

Logos
type: item
description: I want one so bad but its far out of my price range
creator: Ferhago
date: 2004-11-25T02:24:02-00:00

Logos
type: item
description: /me wishes he had money
creator: z310
date: 2004-11-25T03:54:22-00:00

Logos
type: item
description: Meh, I shouldn't have gotten a new cell phone...
creator: xptek
date: 2004-11-25T03:59:42-00:00

Logos
type: item
description: lol Scamp
creator: z310
date: 2004-11-25T04:32:04-00:00

Logos
type: item
description: I'm getting a Ford Mustang emblem like: http://www.mustangsplus.com/images/00225lg.jpg It's gonna be awesome.
creator: cheesesoda
date: 2004-11-25T04:59:00-00:00

Logos
type: item
description: Im getting a new car altogether. And how do you post images from Adobe Photoshop? for a coming home present, my dads' the one holding the with photo in the picture.
creator: AlostSOul
date: 2004-11-25T05:40:59-00:00

Logos
type: item
description: /\ Doitle's Ghetto Cruiser
creator: Doitle
date: 2004-11-25T05:43:58-00:00

Logos
type: item
description: NOBODY HIJACKS JEFFLEE'S TOPICS, NOBODY.
creator: Vitaminous
date: 2004-11-25T06:20:32-00:00

Logos
type: item
description: Jefflee, you should try making an entire Nod/GDI base. You could bid it off for a quite high price I would think.
creator: Dan
date: 2004-11-25T08:07:47-00:00

Logos
type: item
description: Well, I made an Obelisk and an AGT, does that count?
creator: JeffLee67
date: 2004-11-25T08:11:32-00:00

Logos
type: item
description: Not unless theres a map which is called C&C_AGTvsOBI.mix
creator: WNxCABAL
date: 2004-11-25T09:47:36-00:00

Logos
type: item
description: Hey JeffLee67, May I ask which sort of wood you use? And what sort of machinery/tools do you use? Because I don't think these logo's are 100% hand made. I mean, Like the scorpion in the nod logo. But on the other side, There are no machines which can produce that. At least not with the machines and tools where I've worked with. But your work Looks kick ass. Very impressive.
creator: pulverizer
date: 2004-11-25T10:12:14-00:00

Logos
type: item
description: Maybe I'm not understanding what you mean. All of the 3 dimensional parts, like the scorpion tail, are cut out with a jigsaw, or sometimes my scroll saw. That just gives me the outside shape and then I use carving chisels to rough out the 3D shape. Then it is sanded till it is smooth and then is painted. What is not hand made about that? Sure I use some power tools to do some of it, like the bevels on the frames and a router on the low relief areas, but I don't use a CNC machine or something like that to do any of the work. All the routing I do is freehand. As for wood, I've used Pine, Basswood, Oak, Walnut, but Poplar is my favorite. That's because it is cheap, but has really closed grain and takes carving detail well. I do use MDF on some of the logos which makes them pretty heavy, but I only use it because it carves well, and unlike wood, it doesn't warp, shrink, expand, or split. I could just as easily make any of the logos out of solid wood, but I want them to last forever.
creator: JeffLee67
date: 2004-11-25T10:42:52-00:00

Logos
type: item
description: yes, I see it now. But I mean the shapes of the scorpion tail. I had no idea how you could make that. But I see it now. Very great work. I din't see that you used MDF. I'm dutch, So sorry if I was a bit unclear. Since my english is my second language. And for the painting, How did you actualy did that? With hammerrite paint? Or what sort of paint do you use. Again, very impressive work
creator: pulverizer
date: 2004-11-25T10:52:27-00:00

Logos
type: item
description: Here, check the tutorial: http://www.renforums.com/viewtopic.php?p=122159#122159
creator: JeffLee67
date: 2004-11-25T11:08:08-00:00

Logos
type: item
description: Dan Jefflee, you should try making an entire Nod/GDI base. You could bid it off for a quite high price I would think. That would be awesome but in stead og making them all like 10 inches tall they could 5 -7 inches high.
creator: MilkyLep
date: 2004-11-25T20:10:18-00:00

Logos
type: item
description: He could always re-create a WW map
creator: WNxCABAL
date: 2004-11-25T21:42:17-00:00

Logos
type: item
description: I have to say, hes pretty talented
creator: Pendullum
date: 2004-11-26T00:29:10-00:00

Logos
type: item
description: wow these are amazing how much would one of the obelisks cost just out of curiosity
creator: oxi
date: 2004-11-26T18:39:27-00:00

Logos
type: item
description: oxi wow these are amazing how much would one of the obelisks cost just out of curiosity $200.00 US
creator: JeffLee67
date: 2004-11-26T19:29:17-00:00

Logos
type: item
description: I bet some of the guys at Petroglyph would love a small scale recreation of C&C_Feild .
creator: bigwig992
date: 2004-11-27T03:54:27-00:00

Logos
type: item
description: ya, the creators of C&C would really apreciate something like that.
creator: Jecht
date: 2004-11-27T05:08:12-00:00

Logos
type: item
description: Doitle /\ Doitle's Ghetto Cruiser Nice rims.
creator: SuperFlyingEngi
date: 2004-11-27T14:25:32-00:00

Logos
type: item
description: hmmm instead of some people playing with train sets.. we could play with Renegade sets.. in a little base with tanks infantry.. base defense would be sweet ^_^
creator: Majiin Vegeta
date: 2004-11-27T15:31:10-00:00

Logos
type: item
description: How about this for an update? It's not done yet, but it is really getting close. Have to do some more airbrushing and make the letters silver and it will be done! Enjoy:
creator: JeffLee67
date: 2004-11-28T10:15:49-00:00

Logos
type: item
description: Although you can't see it very good, even in this close-up, I assure you that every line, circle, scratch, and bullet hole is right where it is supposed to be. Take a look:
creator: JeffLee67
date: 2004-11-28T10:17:56-00:00

Logos
type: item
description: JeffLee67 Although you can't see it very good, even in this close-up, I assure you that every line, circle, scratch, and bullet hole is right where it is supposed to be. Take a look: I think i just fell in love with you.
creator: MilkyLep
date: 2004-11-28T16:26:25-00:00

Logos
type: item
description: Jeff, you 0wn! its official!
creator: WNxCABAL
date: 2004-11-28T20:34:23-00:00

Logos
type: item
description: Can we get a picture of the original and yours side by side? I'm too lazy to just photoshop it.
creator: Jaspah
date: 2004-11-28T20:43:31-00:00

Logos
type: item
description: Your sinature might work with: ]www.n00bstories.com/image.fetch.php?id=1212370822&.jpg try that out and @JeffLee67 you should check your PM
creator: laeubi
date: 2004-11-28T21:44:31-00:00

Logos
type: item
description: No, he just needs to add http:// before it.
creator: cheesesoda
date: 2004-11-28T21:46:27-00:00

Logos
type: item
description: yeah thats easy to make, we learned how to do that in art 4. EDIT: Not saying that its not time consuming and expensive.
creator: Oblivion165
date: 2004-11-28T21:48:50-00:00

Logos
type: item
description: Easy? I'd sure like to see how that's easy to make.
creator: cheesesoda
date: 2004-11-28T21:57:23-00:00

Logos
type: item
description: well you realy kinda have to take the class, but it envolves a grid system. And if your really luck a plasma cutter.
creator: Oblivion165
date: 2004-11-28T22:01:33-00:00

Logos
type: item
description: OK, the original logo: And mine, so far: Just a bit more airbrushing, some white to bring out the lines, bevel the letters, and some silver on the letters and it'll be done.
creator: JeffLee67
date: 2004-11-28T22:07:53-00:00